Edge moulding only. Supplied with one bearing. Dimensions : Diameter=25 mm Cutting Length : 25 mm Bearing Diameter : 19 mm Cutting Radius 1 : 3 mm Cutting Radius 2 : 5 mm Shank Diameter : 1/2 inch Please note that prices ...

A large ogee panel mould cutter for traditional panelled doors. For stationary machines or portable routers mounted in a table at 12000 RPM recommended speed. Dimensions : Diameter=86 mm Cutting Radius : 22 mm Shank Diameter : 12 mm

Use for producing mortar grooves and for bevelling applications. Dimensions : Diameter : 41mm Cutting Length 1 : 22.5mm Cutting Length 2 : 23mm Angle : 45 degrees Shank Diameter : 1/2 inch Please note that prices in the Trend Cata...

A drill bit guide for use with a template to allow 5mm diameter holes to be drilled for shelf supports. Has a drilling depth of 12.7mm with a barrel diameter of 9.5mm. Please note that prices in the Trend Catalogue download, if shown below...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter=44.7 mm Bearing Diameter : 9.5 & mm Cutting Radius 1 : 16 mm Shank Diameter : 1/2 Please note that pri...

This guide bush can be used as a direct fit to the router for general work where absolute accuracy is not the main requirement. Dimensions : 30mm OD Please note that prices in the Trend Catalogue download, if shown below, may differ t...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 23/32 inch Diameter : 18.2mm Cutting Length : 21...

A six piece pack for use by kitchen fitters. The pack comprises of one worktop cutter C153DX1/2TC, one biscuit jointer C152X1/2TC, 3 x metal panel connectors and a bag of ten No 20 biscuits. Cutters are tungsten carbide tipped with a teflon coatin...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Dimensions : Diameter=10 mm Cutting Length : 25 mm Overall Length : 70 mm Shank Diameter : 1/2 Please note that p...

Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents bu...

This cutter is self-guiding & can be used to produce rebates, lap joints, tongues & rebated corners. Dimensions : Diameter=31.8 mm Cutting Length : 15.9 mm Bearing Diameter : 9.5 & 12.7 mm Shank Diameter : 1/4 inch Please note t...

Complete side fence for the T10 router. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....

Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

Replacement complete side fence for the T11. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....

HSS drill for use with the BL/JIG/KIT. Dimensions : Diameter 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices ex...

This guide bush can be used as a direct fit to the router for general work where absolute accuracy is not the main requirement. Dimensions : 40mm OD Please note that prices in the Trend Catalogue download, if shown below, may differ t...

Replacement table fine height adjuster for the T11. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....

For veining, panelling, 'V' grooving, bevelling & chamfering. Dimensions : Diameter=1/2 inch Diameter=12.7 mm Cutting Length : 7/16 inch Cutting Length : 11 mm Angle : 60 degrees Shank Diameter : 1/2 inch Please note that p...

A template to rout out a lock recess in a door edge. For 2, 3 and 5 lever sash and dead mortise locks, and allows both lock mortise and face plate to be routed. Includes six recess templates and three mortise templates. Suitable for foll...

Set of four corner jointing brackets for the VARIJIG. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....