
28.55 £
For metal, GRP, plastic and wood. Carving, weld removal and drilling hole enlarging. Dimensions : Diameter : 10mm Cutting Length : 20mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown ...

82.80 £
Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material such as MDF, veneer finish and laminat...

29.84 £
Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents bu...

60.44 £
Cutter for non-ferrous metals. For fine finish and long life. Coolants are required when machining aluminium, ie. wax, mist coolant or an air jet. Solid Tungsten Carbide (STC). Use at speed 12000 - 24000 RPM. Dimensions : Diamete...

42.11 £
Cutter for machining acrylic & plastics with low melting point. Two flute for fine finish. Solid Carbide and are long lasting for a super fine finish. Upcut helical gives long lasting super fine finish. Use Trendicote to enhance the cutte...

20.95 £
TCT two wing slotters with 1/4 inch bore. Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dimen...

20.95 £
TCT two wing slotters with 1/4 inch bore. Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dimen...

22.95 £
TCT two wing slotters with 1/4 inch bore. Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dimen...

50.95 £
Replacement profile block for the 20/50X1/2TC. Dimensions : Diameter : 35.0 mm Cutting Radius : 3 mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Ca...

54.95 £
Replacement chamfer profile cutter for the 338X1/2TC and 339X1/2TC. Dimensions : Diameter : 47.0 mm Angle : 45 degrees Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as thos...

1.49 £
Replacement screw for the rota-tip cutters. Dimensions : ROTATIP GRUB SCREW M3X5.0mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend...

7.95 £
Replacement arbor for the 765X1/2TC. Dimensions : Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Pric...

35.95 £
Trend Block A=65í Angle (Tct Router Cutter Range / Chamfer) Replacement upper 65 degrees block for the 766X1/2TC. Dimensions : Angle : 65 degrees WIdth=27.8mm Please note that prices in the Trend Catalogue download, if shown ...

35.95 £
Trend Block B=65í Angle (Tct Router Cutter Range / Chamfer) Replacement upper 65 degrees block for the 766X1/2TC. Dimensions : Angle : 65 degrees WIdth=27.8mm Please note that prices in the Trend Catalogue download, if shown ...

36.95 £
Replacement block for the 768X1/2TC. Dimensions : Diameter : 35.0 mm Cutting Radius 1 : 4.8 mm Cutting Radius 2 : 6.3 mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as ...

13.95 £
Replacement tapered finger cutter for the 866X1/2TC. Dimensions : Diameter=40.0mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend Li...

1.95 £
Pack include, hex key, screw and washer. Dimensions : Hex key=3mm Screw=M4X6mm Washer IDiameter : 4.0mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in...

1.95 £
Pack includes, hex key, screw, washer and shield. Dimensions : Hex key=5/64 inch Screw=NC3 X 3/8 inch Washer IDiameter : 2.0mm Shield ODiameter : 3/8inch IDiameter : 1/8inch Please note that prices in the Trend Catalogue downloa...

1.49 £
Pack includes, screw and washer. Dimensions : Screw=NC2 X 7/32 inch Washer IDiameter : 2.0mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue...

71.95 £
Replacement profile block convex for PSC/106X1/2TC. Dimensions : Diameter : 46 mm Cutting Length : 15 mm Cutting Radius : 10 mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website pric...