
55.95 £
The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different parts of these cutters can be used to give various profiles Dimensions : Diameter : 25.4mm Cutting Length : 45mm B...

76.95 £
Side profile for a handrail requiring a good grip. Can be used in conjunction with four different cutters to produce different handrail tops. Dimensions : Diameter : 35mm Cutting Length : 38mm Bearing Diameter : 12.7mm Cutting Radi...

30.95 £
Heavy duty for slotting and trimming and other abrasive plastics including phenolic resin. Dimensions : Diameter : 1/2 inch Diameter : 12.7 mm Cutting Length : 1 1/4 inch Cutting Length : 32 mm Shank Diameter : 1/2 Please note ...

13.95 £
Bearing multi pack for use with bearing guided router cutter. Dimensions : IDiameter : 3/16 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogu...

3.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

43.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

8.95 £
Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : IDiameter : 3/16 inch ODiameter : 25....

7.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Dimensions : IDiameter : 1/4 inch ODiameter : 29.0mm Thickness=6.0mm Please note that prices in the Trend Catalogue download, if shown be...

8.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : IDiameter : 12.0mm ODiameter : 35.0mm Thickness=9.0mm Please note tha...

10.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : IDiameter : 12mm ODiameter : 39.0mm Thickness=9.0mm Please note that ...

11.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : IDiameter : 12.0mm ODiameter : 41.0mm Thickness=9.0mm Please note tha...

10.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

11.95 £
Two fluted Solid Carbide insert straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature.

8.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

11.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

11.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

11.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

16.95 £
Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

8.95 £
Single fluted Tungsten Carbide straight cutter for fast free cutting. This cutters has extra clearance and gives a stronger backing support to the tip. Single flute should be chosen where speed and clearance rates are more important than the f...

13.95 £
This is ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide, with two flutes. Dimensions : Diameter : 3.2mm Cutting Length : 9.5mm Cutting Radius : 1.6mm Shank Diameter : 1/4 inch Please note that p...