Cutter for trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bea...

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Dimensions : Diameter : 25.4mm Cutting Length : 16mm Bearing Diameter : 9.5mm & 12.7mm Cuttin...

The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. Dimensions : Diameter : 25.4mm Cutting Length : 14.3mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 7.9mm Shank Diameter : ...

The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. Dimensions : Diameter : 28.5mm Cutting Length : 14mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 9.5mm Shank Diameter : 1/...

Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings. For stationary machines - 18000 RPM recommended speed. Dimensions : Diameter : 51mm Cutting Length : 24mm

Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings. Dimensions : Diameter : 38mm Cutting Length : 16mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 6mm

Self guided trimmer with ball bearings, fitted to both shank and nose. Allowing templates to be placed either on top or bottom of the material. Dimensions : Diameter : 3/4 inch Diameter : 19.1mm Cutting Length : 50mm Bearing Diameter : ...

Supplied with two bearings. Larger bearing removes quirk. Dimensions : Diameter : 41.5mm Cutting Length 1 : 13mm Cutting Length 2 : 13.7mm Bearing Diameter : 12.7 & 19mm Angle : 35 degrees Shank Diameter : 1/2 inch Please not...

Trend B/Guided Cham A=45í X 35.1mm Dia (Tct Router Cutter Range / Chamfer) Supplied with one bearing. Dimensions : Diameter : 35.1mm Cutting Length 1 : 12mm Cutting Length 2 : 16mm Bearing Diameter : 12.7mm Angle : 45 degrees S...

Two bearings are supplied for an optional lower quirk. Larger bearing removes the quirk. Dimensions : Diameter : 30mm Cutting Length : 13mm Bearing Diameter : 12.7mm & 16mm Cutting Radius : 5mm Shank Diameter : 1/2 inch Ple...

Trend Bevel Trim A=30í X 26mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 30 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges.

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay. Twin bearings for stability by increasing the bearing surface and is an industrial profiling tool for longer runs of work.

Two flute. For trimming of laminate and solid lipping. V-groove to hide glue line. Dimensions : Diameter : 16mm Diameter : 12.7mm Cutting Length : 25.4mm Bearing Diameter : 12.7mm Shank Diameter : 1/4 inch Please note tha...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 28mm Cutting Length : 12.7mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 7.9mm Shank Diameter : 1/2...

Trend Bevel Trim A=80í X 20mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cutter for trimming and bevelling timber, lippings and plastic laminate.. Can only be used in laminate trimming routers, or when straight fence guides are intro...

Trend Bevel Trim A=60í X 24mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when straight fence guides are introd...

Trend Combi Trimmer A=60íX12mm Dia 253362 (Tct Router Cutter Range / Laminate Trimmers) Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when straight fence guides ar...

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Dimensions : Diameter : 6.3mm Cutting Length : 20mm Shank Diameter : 1/4 inch Please note...

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Recess will require final trimming square with a hand chisel. Dimensions : Diameter : 15.9mm Cutting Length : 19mm Sha...

Cutter is designed to plunge and machine or mill lateral slots. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a specia...