Trend B'Guided Ovolo 12.7mm Rad 3.2mm Ste (Tct Router Cutter Range / Large Step Round Over & Ovolo) A bearing guided round over & ovolo router cutter supplied with three ball bearings to give a rounding over and two sizes of step ovolo mould o...

Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

This dovetail cutter produces a tight reliable joint for drawers, boxes etc. For use with the Craft Dovetail Jigs. Dimensions : Diameter : 19.1mm Angle : 97 degrees Shank Diameter : 12mm Please note that prices in the Trend Cata...

A precision made laser cut zinc plated steel template comb for the CDJ600. A 32mm dowel template. Dimensions : Material thickness 12mm to 30mm. Material width up to 610mm. Dowelling 32mm centres Max. 25mm Please note that ...

A precision made laser cut zinc plated steel template comb for the CDJ600. Dimensions : Material thickness 12mm to 30mm. Material width up to 610mm. Through dovetail Min. 17mm Max.25mm Please note that prices in the Trend ...

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Dimensions : Diameter : 32mm Cutting Length 1 : 15mm Cutting Length 2 : 22mm Angle : 45 degrees Shank Diameter : 1/2 inch

This specially designed machine bits has a new form of scriber to allow use at higher speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used. Use between 100...

Ideal for fast chamfering. Popular in the sign making trades. Pin diameter 5.5mm. For chamfering edges of plastic material in the sign industry. Dimensions : Cutting Length 1 : 10mm Cutting Length 2 : 14mm Angle : 45 degrees Sha...

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Dimensions : Diameter : 28.5mm Cutting Length 1 : 14.5mm Cutting Length 2 : 19.2mm Angle : 45 degrees Shank Diameter : 1/4 inch

Trend Panel Mould A=45í X 19.1mm Dia (Tct Router Cutter Range / Panel Mould) Complete with one bearing. Dimensions : Diameter : 19.1mm Cutting Length : 16mm Bearing Diameter : 19.1mm Angle : 45 degrees Shank Diameter : 1/2 inch...

This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 10000RPM. Dimensions : Diameter : 25mm Overall Length : 57mm

For coves and part of a rule joint. Solid Carbide insert. Dimensions : Diameter : 6.4 mm Cutting Length : 7/16 inch Cutting Length : 12.7 mm Cutting Radius : 3.2 mm Shank Diameter : 1/4 inch Please note that prices in the T...

For coves and part of a rule joint. Single flute. Dimensions : Diameter : 12.7mm Cutting Length : 19mm Cutting Radius : 6.3mm Shank Diameter : 8mm Please note that prices in the Trend Catalogue download, if shown below, may d...

For coves and part of a rule joint. Two flute. Dimensions : Diameter : 19.1mm Cutting Length : 31.7mm Cutting Radius : 9.5mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, m...

For coves and part of a rule joint. Two flute. Dimensions : Diameter : 18mm Cutting Length : 19mm Cutting Radius : 9mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, may dif...

Tungsten Carbide Tipped. Two flute cutter with tip sheared up and down, giving a fine finish. For trimming veneered and double-faced boards, plywoods and natural timbers. Action of pushing the chips towards the middle of the board being cut....

Decorative panel mould cutter for raised panelling or edge moulding. Dimensions : Diameter : 25mm Diameter : 10mm Cutting Length : 9.5mm Cutting Radius : 3.2mm Shank Diameter : 1/4 inch Please note that prices in the Trend Cata...

This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM. Matches our range of profile scribers. Suitable for use on natural timber and MDF. When joining sections to produce solid wood panels, alternate the growth r...

Decorative classic panel mould cutter for raised panelling or edge moulding. Dimensions : Diameter : 19mm Cutting Length : 12.7mm Cutting Radius 1 : 4mm Cutting Radius 2 : 5mm Shank Diameter : 1/4 inch Please note that prices i...

Ideal for following templates for panelling and profiling in furniture manufacture. It is advisable that the template is at least 5mm thicker than the cut length of the cutter. Complete with one bearing. Dimensions : Diameter : 22mm ...