Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a 12mm clear bore. Enables it to...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 19/32 inch Diameter : 15mm Cutting Length : 25mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 5/8 inch Diameter : 15.9mm Cutting Length : 28mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 5/8 inch Diameter : 15.9mm Cutting Length : 63mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 23/32 inch Diameter : 18.2mm Cutting Length : 21...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 3/4 inch Diameter : 19mm Cutting Length : 25mm

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 63/64 inch Diameter : 25mm Cutting Length : 25mm...

This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

Two replaceable Solid Carbide blades. For specialist applications requiring low down-time and economy of a replaceable tip. Blade of cutter can be rotated through 180 degree to give one new cutting edge. Trimming of laminates and veneered m...

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should b...

Trend Bevel A=75í X 30mm Dia (Tct Router Cutter Range / Chamfer) Useful for bevelling thick timbers. For jointing, boxes, pilasters and carcassing. For full bevels template should be fixed to component Dimensions : Diameter : 30...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 18.7mm Cutting Length : 9.5mm Overall Length : 49mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 3mm...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 19mm Cutting Length : 9.5mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 3.2mm Shank Diameter : 1/4 ...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 24.7mm Cutting Length : 12mm Overall Length : 51mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 6mm

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 32mm Cutting Length : 16mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 9.5mm Shank Diameter : 8mm

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 34.9mm Cutting Length : 18mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 11.1mm Shank Diameter : 1/...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. For stationary machines - 16000 RPM recommended speed. Dimensions : Diameter : 51mm Cutting Length : 25mm Bearing Diameter : 9.5mm ...

Cutter for trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the be...