Two flute cutter with an extra long shank. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Cutter has a narrow neck. Dimensions : Diameter : 3/8 inch Diameter : 9.5mm C...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Dimensions : Diameter : 23/64 inch Diameter : 9mm Cutting Length : 19mm Shank Diameter : ...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Cutter has a TCT centre tip. Dimensions : Diameter : 25/64 inch Diameter : 10mm Cutting...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Cutter has a TCT centre tip. Dimensions : Diameter : 25/64 inch Diameter : 10mm Cutting...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 15/32 inch Diameter : 12mm Cutting Length : 38mm...

Trend Routaseal A=115í X 5mm Dia (Tct Router Cutter Range / Routaseal) For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Solid Tungs...

Trend Dovetail A=100í X 10mm Dia (Tct Router Cutter Range / Dovetail) For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Dimensio...

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Purpose made for stair housing jigs. Dimensions : Diameter : 19mm Cutting Leng...

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Left hand rotation. Purpose made for stair trenching machines. Dimensions : ...

Slotters with M12 x 1.0. threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor has a 25mm thread/spindle length. Di...

Replacement arbor for an 8mm bore tool. Dimensions : Overall Length : 76 mm Shank Diameter : 3/8 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the C...

Replacement arbor for the C155X8mmTC. Dimensions : Overall Length : 87 mm Shank Diameter : 8mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogu...

Allows decorative cuts in panels and frames to disguise glue lines. Dimensions : Diameter : 36 mm Angle : 45 degrees Bore=1/4 inch Kerf=6mm Please note that prices in the Trend Catalogue download, if shown below, may differ to ...

Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a 12mm clear bore. Can be mounte...

Designed for routing Corian, which is used in many bathrooms and kitchens. Dimensions : Diameter : 22.2mm Cutting Length : 12.7mm Bearing Diameter : 12.7mm 16mm 19mm Shank Diameter : 12mm Please note that prices in the Trend Cat...

Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a M12 threaded boss to enable it to...

Neatly cuts grooves on doors or frames to accept Intumescent Strip. For use with seals of 15mm width and 4mm thickness. By using alternative ball bearing diameters, other seal thicknesses can be introduced. For either frame or door applicat...

Trend 'T' Slotter 40.8mm Dia X 4mm Cut (Tct Router Cutter Range / T Slotters) Heavy duty 'T' slot cutter for clamping and hanging applications. Dimensions : Diameter : 40.8mm Diameter : 9.7mm Cutting Length : 4mm Shank Diameter : ...

Heavy duty 'T' slot cutter for slat wall. A relief cut is required when used. Dimensions : Angle : 119deg Diameter : 30mm Diameter : 10.5mm Cutting Length : 7mm Cutting Radius : 3mm Shank Diameter : 1/2 inch Please note th...

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip (Tonk Strip). Dimensions : Diameter : 9.5mm Diameter : 19mm Cutting Length 1 : 13mm Cutting Length ...