Two flute cutter for producing extra clean cut bevelled edges. No plunge cut. Dimensions : Diameter : 34.9mm Cutting Length : 10mm Angle : 45 degrees Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue dow...

Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. Dimensions : Cutting Length : 12.7mm Bearing Diameter : 9.5mm Angle : 45 degrees Shank Diameter : 8mm Please note that prices in the Trend Catalogue downloa...

This is ideal for engraving and decorative panel work. Made with a Solid Tungsten Carbide insert, with two flutes. Dimensions : Diameter : 4.8mm Cutting Length : 12.7mm Cutting Radius : 2.4mm Shank Diameter : 1/4 inch Please n...

This staff bead is ideal for producing nosings and attractive edges. Edge cut only. Dimensions : Cutting Length : 19.1mm Cutting Radius : 5.2mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, i...

Self-guiding cutter for rounding over edges, without the need for a side fence. If cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D...

By raising the cutter, the top quirk is removed. Dimensions : Cutting Length : 13.5mm Bearing Diameter : 9.5mm Cutting Radius : 4mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below...

Use bearing B127A to remove the quirk. Dimensions : Cutting Length : 17.5mm Bearing Diameter : 9.5mm Cutting Radius 1 : 6.3mm Cutting Radius 2 : 4.8mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue dow...

Small panelling cutters, popular for decorative cupboard doors and furniture embellishments. Dimensions : Diameter : 1/2 inch Diameter : 12.7 mm Cutting Length : 9.5mm Cutting Radius 1 : 3.2mm Cutting Radius 2 : 4mm Shank Diameter : ...

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Dimensions : Diameter : 9.5mm Cutting Length : 12.7mm Bearing Diameter : 9.5mm Shank ...

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions : Diameter : 26mm D2=22mm Cutting Length : 16mm Bearing Diameter : 15.9mm Cutting Radius : 4.8mm Shank Diameter : 1/4 ...

For decorative panel and veining work. Ideal for carving with the Routerlathe. Dimensions : Diameter : 9.5mm Cutting Length : 7.5mm Cutting Radius : 4.8mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalog...

This two wing Tungsten Carbide Tipped slotting cutter is ideal for grooving and rebating operations. A 1/2 inch diameter bearing is supplied with the cutter. Depth of cut (E) can be changed by purchasing alternative bearing sizes. Easy to se...

Should be used with a router of minimum power rating of 750 watts. It should be fitted in a router table which has an adjustable backfence and a mitre fence or workholding jig attachment. For use in a router table only Timber thickness are M...

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the bis...

Should be used with a router of minimum power rating of 750 watts. It should be fitted in a router table which has an adjustable backfence and a mitre fence or workholding jig attachment. With an instruction booklet on constructing frame and pa...

Should be used with a router of minimum power rating of 750 watts. It should be fitted in a router table which has an adjustable backfence and a mitre fence or workholding jig attachment. For use in a router table only Timber thickness are M...

This dovetail cutter produces a tight reliable joint for drawers, boxes etc. For use with Nu-tool & APTC Dovetail Jigs. Dimensions : Diameter : 12.7 mm Cutting Length : 12.7 mm Overall Length : 63 mm Bearing Diameter : 12.7 mm Ang...

For use in a router table only. Take 5-6 passes at repeated depths. For stationary machines - max. 16000 RPM recommended speed. Dimensions : Diameter : 67mm Cutting Length : 16mm Bearing Diameter : 12.7mm Cutting Radius : 17.5mm

Replacement length stop for use with the COMBI650 & COMBI1001. Dimensions : For accurate positioning Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Cat...

One flute straight cutter from the Dolls house cutter set. Dimensions : Diameter : 2 mm Cutting Length : 5 mm Shank Diameter : 8mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website p...