54.95 £
To adjust the groove width this tool can be unassembled and 1 mm spacers are inserted between the groovers, giving a 1mm increment increase in groove width. Shims can be used in conjunction with this tool to make infinitely variable groove widths.
30.95 £
A router drilling tool to create a radius pip or dome in timber. Useful for carvings. Dimensions : Diameter : 12mm Cutting Length : 9mm Cutting Radius : 4mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue...
33.95 £
A router drilling tool to create a radius pip or dome in timber. Useful for carvings. Dimensions : Diameter : 14mm Cutting Length : 9mm Cutting Radius : 5mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue...
18.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. With Solid Carbide insert rather than brazed tip. Dimensions : Diameter : 5/64 inch Diame...
20.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1/2 inch Diameter : 12.7mm Cutting Length : 25mm...
16.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. With Solid Carbide insert rather than brazed tip. Dimensions : Diameter : 3/16 inch Diame...
15.95 £
Two flute cutter with an extra long shank. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only cut ...
23.95 £
Two flute cutter with an extra long shank. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only cut ...
21.95 £
Two flute cutter with an extra long shank. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only cut ...
29.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Has no centre TC tip and is not suitable for plunging. Dimensions : Diameter : 15/32 inch
23.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Has no centre TC tip and is not suitable for plunging. Dimensions : Diameter : 15/32 inch
29.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1/2 inch Diameter : 12.7mm Cutting Length : 32mm...
28.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1/2 inch Diameter : 12.7mm Cutting Length : 37mm...
28.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Especially suited for drilling, but to detriment of clearance at high feed rates....
22.95 £
Trend Dovetail A=103íX11.8mm Dia 253353 (Tct Router Cutter Range / Dovetail) For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. For u...
27.95 £
Trend Dovetail A=100í X 18mm Dia (Tct Router Cutter Range / Dovetail) For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Dimensio...
43.95 £
For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Purpose made for stair housing jigs. Dimensions : Diameter : 22mm Cutting Leng...
11.95 £
Slotters with M12x1.0. threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Dimensions : Overall Length : 49 mm Shank D...
12.95 £
Standard duty arbor with 1/4 inch spindle and spacers. Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions. Use shims/spacers to prevent bearings with larger diameters, touching the tips of the slott...
37.95 £
TCT two wing slotters with 1/4 inch bore Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dimen...
