
50.95 £
Decorative panel mould cutter for raised panelling or edge moulding. Dimensions : Diameter : 25mm Diameter : 10mm Cutting Length : 9.5mm Cutting Radius : 3.2mm Shank Diameter : 1/2 inch Please note that prices in the Trend Cata...

62.95 £
Raised panel cutter on 8mm shank. Suitable for use with Ref. PSC/3X8mmTC. For stationary machines or portable routers mounted in a table at 22000 RPM recommended speed. Dimensions : Diameter : 45mm Diameter : 17mm Cutting Length : 14mm...

71.95 £
Suitable panel mould for use with Ref. PSC/2X1/2TC. For stationary machines or portable routers mounted in a table at 18000 RPM recommended speed. Dimensions : Diameter : 50mm Diameter : 26mm Cutting Length : 14mm Cutting Radius : 6m...

34.95 £
Decorative tradional panel mould cutter for raised panelling or edge moulding. Dimensions : Diameter : 19.1mm Cutting Length : 11.1mm Cutting Radius 1 : 3.5mm Cutting Radius 2 : 0.8mm Shank Diameter : 1/4 inch Please note that ...

89.95 £
This cutter & Ref. PSC/5X1/2TC are available as set Ref. PDS/5X1/2TC. For stationary machines or portable routers mounted in a table at 12000 RPM recommended speed. Dimensions : Diameter : 86mm Cutting Length : 12.7mm Bearing Diamete...

89.95 £
A large ogee panel mould cutter for traditional panelled doors. Suitable for use with Ref. PSC/2X1/2TC. For stationary machines or portable routers mounted in a table at 12000 RPM recommended speed. Dimensions : Diameter : 85.7mm Cuttin...

65.95 £
Shape approximately equivalent to Ref. 18/80X1/2TC. Suitable panel mould for use with Ref. PSC/5X1/2TC & PSC/50X1/2TC. Ideal for use when no variable speed facility is available or when shaped work is not required. When used in a portable ma...

65.95 £
Shape approximately equivalent to Ref. 18/83X1/2TC. Suitable panel mould for use with Ref. PSC/1, PSC/2, PSC/10 and PSC/20X8mmTC. Ideal for use when no variable speed facility is available or when shaped work is not required. When used in a...

55.95 £
Decorative ogee cutter for finishing furniture tops. Dimensions : Diameter : 33mm Diameter : 8mm Cutting Length : 23mm Cutting Radius : 7.2mm Shank Diameter : 3/8 inch Please note that prices in the Trend Catalogue download, if...

73.95 £
Classic style cutter, can be used for moulding, panelling and when reversed, for a scribed joint or rule joint for a drop leaf table. Dimensions : Diameter : 38mm Cutting Length : 17mm Cutting Radius : 6mm Shank Diameter : 1/2 inch

21.95 £
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. This cutter has a Solid Carbide insert rather than brazed tip. Han...

25.95 £
Single flute cutter with an extra long shank. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only c...

35.95 £
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. This cutter has a Solid Carbide insert rather than brazed tip.

63.95 £
Classic style for moulding, panelling and jointing. Dimensions : Diameter : 25mm Diameter : 10mm Cutting Length : 15mm Cutting Radius : 5mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if s...

34.95 £
Complete with one bearing. Dimensions : Diameter : 19.1mm Cutting Length : 11.1mm Bearing Diameter : 19.1mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the webs...

35.95 £
Complete with one bearing. Dimensions : Diameter : 25.4mm Cutting Length : 11.1mm Bearing Diameter : 25.4mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the webs...

48.95 £
Complete with one bearing. Dimensions : Diameter : 19.1mm Cutting Length : 16mm Bearing Diameter : 19.1mm Cutting Radius : 6.35mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below...

52.95 £
Primarily water channel cutter. Also produces radiused rebates and grooves. Suitable for plunge cutting. Dimensions : Diameter : 25mm Cutting Length : 25mm Cutting Radius : 5mm Shank Diameter : 1/2 inch Please note that price...

34.95 £
Oversize profiler allows component to be routed oversize to template. Useful when making jigs, templates and patterns. Can be used for trenching operations in shallow passes. Dimensions : Diameter : 1/2 inch Diameter : 12.7mm Cutti...

41.95 £
Trend Collet Set Gof1600 3/8 (Collets / 3/8 Inch) 3/8 inch collet and nut. Dimensions : Bosch GOF1600A, GOF1700ACE Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as ...