34.95 £
Allows decorative cuts in panels and frames to disguise glue lines. Dimensions : Diameter : 36 mm Cutting Radius : 6mm Bore=1/4 inch Kerf=6mm Please note that prices in the Trend Catalogue download, if shown below, may differ t...
48.95 £
Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a 12mm clear bore. Can be mount...
34.95 £
TCT four wing slotters with 1/4 inch bore Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dime...
40.95 £
Designed for routing Corian, which is used in many bathrooms and kitchens. Dimensions : Diameter : 22.2mm Cutting Length : 19mm Bearing Diameter : 12.7mm 16mm 19mm Shank Diameter : 12mm Please note that prices in the Trend Catal...
46.95 £
Designed for routing Corian, which is used in many bathrooms and kitchens. Dimensions : Diameter : 22.2mm Cutting Length : 6.35mm Bearing Diameter : 12.7mm 16mm 19mm Shank Diameter : 12mm Please note that prices in the Trend Cat...
102.95 £
Trend Slotseal Carripile 11 Recessing Set is designed to accommodate the popular Slotseal Carripile 11 Weatherstrip System. It comes complete with a guide bearing to reduce setting-up time. Carripile 11 can be used for compression or sliding appl...
73.95 £
Neatly cuts grooves on doors or frames to accept Intumescent Strip. For use with seals of 10mm width and 4mm thickness. By using alternative ball bearing diameters, other seal thicknesses can be introduced. For either frame or door applicati...
54.95 £
Trend T' Slotter 12mm Dia X 10mm Cut (Tct Router Cutter Range / T Slotters) Slots for concealing electric cables etc. A 6mm slot must be cut first to allow for the cutter neck. Care must be taken to avoid breakage. Dimensions
44.95 £
Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip (Tonk Strip). Dimensions : Diameter : 13mm Diameter : 19mm Cutting Length 1 : 10mm Cutting Length 2...
64.95 £
Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a 12mm clear bore. Enables it to...
27.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 5/8 inch Diameter : 15.9mm Cutting Length : 28mm...
32.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 5/8 inch Diameter : 15.9mm Cutting Length : 25mm...
21.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 5/8 inch Diameter : 16mm Cutting Length : 19mm
29.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 3/4 inch Diameter : 19mm Cutting Length : 25mm
33.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 29/32 inch Diameter : 23mm Cutting Length : 19mm...
34.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 61/64 inch Diameter : 24mm Cutting Length : 19mm...
44.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1 1/32 inch Diameter : 26mm Cutting Length : 25m...
46.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1 1/16 inch Cutting Length : 32mm Shank Diamete...
49.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1 1/4 inch Diameter : 31.7mm Cutting Length : 25...
64.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. TCT centre tip. For stationary machines - max. 18000 RPM recommended speed. Dimensions : Diameter : 1 31/32 inch Di...
