This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

Two replaceable Solid Carbide blades. For specialist applications requiring low down-time and economy of a replaceable tip. Blade of cutter can be rotated through 180 degree to give one new cutting edge. Trimming of laminates and veneered ...

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should b...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 38mm Cutting Length : 19mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 12.7mm Shank Diameter : 1/2 ...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. For stationary machines - 16000 RPM recommended speed. Dimensions : Diameter : 63.5mm Cutting Length : 32mm Bearing Diameter : 9.5m...

Cutter for trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bea...

Cutter for trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the be...

Roman ogee with self guiding facility. To change profile use larger bearing and vary the depth. Supplied with two bearings. Dimensions : Diameter : 25.4mm Cutting Length : 15.9mm Bearing Diameter : 9.5 & 12.7mm Cutting Radius : 4mm

The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. Dimensions : Diameter : 15.9mm Cutting Length : 12.7mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 3.2mm Shank Diameter : ...

The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. Dimensions : Diameter : 15.9mm Cutting Length : 12.7mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 3.2mm Shank Diameter : ...

The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. Dimensions : Diameter : 19.1mm Cutting Length : 14.3mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 4.8mm Shank Diameter : ...

The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. Dimensions : Diameter : 34.9mm Cutting Length : 16mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 12.7mm Shank Diameter : 1...

Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings. Dimensions : Diameter : 29mm Cutting Length : 12.7mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 4m...

Trend B/Guided Cham A=25í X 41mm Dia (Tct Router Cutter Range / Chamfer) Supplied with two bearings. Larger bearing removes quirk. Dimensions : Diameter : 41mm Cutting Length 1 : 5mm Cutting Length 2 : 13mm Bearing Diameter : 12....

Supplied with one bearing. Dimensions : Diameter : 35.1mm Cutting Length 1 : 12mm Cutting Length 2 : 16mm Bearing Diameter : 12.7mm Angle : 45 degrees Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue down...

Trend Bevel Trim A=80í X 20mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges.

Large triple radii cutter for shelving and cappings etc. Dimensions : Diameter : 47.3mm Cutting Length : 23.8mm Bearing Diameter : 12.7mm Cutting Radius : 6mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catal...

Self-guiding cutter with facility to change profile by fitting large bearing and varying the depth. Supplied with two bearings. Dimensions : Diameter : 28.5mm Cutting Length : 12.7mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius...

Trend Bevel Trim A=60í X 28mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 60 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges.