
89.95 £
High quality Tungsten Carbide Tipped slotting cutters. Abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint. The Finger Jointer fits into any portable or stationary router with a...

74.95 £
A reversible finger joint. Max Thickness 18mm. Dimensions : Diameter : 47.5 mm D2=37 mm Cutting Length : 30 mm Shank Diameter : 1/2 Please note that prices in the Trend Catalogue download, if shown below, may differ to the we...

36.95 £
The guide pin follows the work edge to give a pre-set width of rebate. Dimensions : Cutting Length : 14mm Bearing Diameter : Pin guided 4.8mm Rebate : 9.5mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogu...

80.95 £
A wider edge finish for furniture. For edge moulding applications only. No bottom cut. Dimensions : Diameter : 36mm Cutting Length : 40mm Cutting Radius 1 : 5mm Cutting Radius 2 : 13mm Shank Diameter : 1/2 inch Please n...

42.95 £
The guide pin follows the work edge to give a pre-set width of rebate. Dimensions : Cutting Length : 14mm Bearing Diameter : Pin guided 4.8mm Rebate : 12.7mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalog...

52.95 £
Edge moulding only. Dimensions : Diameter : 25.1mm Cutting Length : 25mm Cutting Radius 1 : 2mm Cutting Radius 2 : 6mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, may diffe...

63.95 £
A popular edge finish for furniture. For edge moulding applications only. No bottom cut. Dimensions : Diameter : 28.4mm Diameter : 22.4mm Cutting Length : 19mm Cutting Radius 1 : 2.5mm Cutting Radius 2 : 5mm Shank Diameter : ...

57.95 £
By making a second pass at 90 degrees a full corner bead can be cut. Dimensions : Diameter : 31.9mm Diameter : 28.6mm Bearing Diameter : 16mm Cutting Radius : 7mm Shank Diameter : 1/4 inch Please note that prices in the Trend C...

59.95 £
Especially designed for routing Corian which is used in many bathrooms and kitchens. Dimensions : Diameter : 25mm Cutting Length 1 : 24mm Cutting Length 2 : 29mm Bearing Diameter : 19mm Cutting Radius : 6mm Shank Diameter : 1/2 inch

57.95 £
Especially designed for routing Corian which is used in many bathrooms and kitchens. Dimensions : Diameter : 28.5mm Cutting Length : 25mm Bearing Diameter : 28.57mm Shank Diameter : 12mm Please note that prices in the Trend Cata...

29.95 £
Especially designed for routing Corian which is used in many bathrooms and kitchens. Dimensions : Diameter : 23mm Diameter : 19.1mm Cutting Length : 25mm Bearing Diameter : 21mm Shank Diameter : 1/2 inch Please note that price...

60.95 £
Especially designed for routing Corian, which is used in many bathrooms and kitchens. Dimensions : Diameter : 16mm Cutting Length : 45.5mm Shank Diameter : 12mm Please note that prices in the Trend Catalogue download, if shown belo...

61.95 £
A cutter for producing a type of cornice. Chamfers can be routed, using a 45 degrees cutter, e.g. Ref. 46/38X1/2TC. This cutter can also be used to produce a matching dado rail. For edge moulding only. Dimensions : Diameter : 32mm...

86.95 £
For architraves & framing as well as edge moulding. Dimensions : Diameter : 45mm Diameter : 23mm Cutting Length : 30mm Bearing Diameter : 16mm Cutting Radius 1 : 38mm Cutting Radius 2 : 2.5mm Shank Diameter : 1/2 inch Plea...

59.95 £
Ideal for edging traditional picture frames, mirrors, clocks and plaques. Dimensions : Diameter : 45 mm Cutting Length : 1 inch Cutting Length : 25.4 mm Bearing Diameter : 12.7 mm Cutting Radius 1 : 9.5 mm Cutting Radius 2 : 9.5 mm

29.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

3.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

8.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Dimensions : IDiameter : 1/4 inch ODiameter : 24.0mm Thickness=5.9mm Please note that prices in the Trend Catalogue download, if shown be...

10.95 £
Replacement bearing for router cutter. Always check the tightness of the fixing screw before using the cutter. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Dimensions : ...

7.95 £
Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Dimensions : IDiameter : 1/4 inch ODiameter : 26.0mm Thickness=5.9mm Please note that prices in the Trend Catalogue download, if shown be...