Self-guiding cutter for rounding over edges, without the need for a side fence. If cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D...

Self-guiding cutter for rounding over edges, without the need for a side fence. If cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D...

By raising the cutter, the top quirk is removed. Dimensions : Cutting Length : 13.5mm Bearing Diameter : 12.7mm Cutting Radius : 4mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown belo...

Alternative bearing B95A adds a quirk. Dimensions : Cutting Length : 12.7mm Bearing Diameter : 12.7mm Cutting Radius 1 : 5mm Cutting Radius 2 : 4mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue downlo...

Alternative bearing B95A adds a quirk. Dimensions : Cutting Length : 17.5mm Bearing Diameter : 12.7mm Cutting Radius 1 : 6.3mm Cutting Radius 2 : 4.8mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue do...

Small panelling cutters, popular for decorative cupboard doors and furniture embellishments. Dimensions : Diameter : 3/4 inch Diameter : 19.1 mm Cutting Length : 7/16 inch Cutting Length : 11.1 mm Cutting Radius : 3.2 mm Shank Diam...

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Dimensions : Diameter : 12.7mm Cutting Length : 25.4mm Bearing Diameter : 12.7mm Shan...

Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

For panel and veining work. Ideal for barley twists using the Routerlathe. Dimensions : Diameter : 27mm Cutting Length : 16mm Cutting Radius : 7.5mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue downloa...

For panel and veining work. Ideal for barley twists using the Routerlathe. Dimensions : Diameter : 27mm Cutting Length : 16mm Cutting Radius : 7.5mm Shank Diameter : 8mm Please note that prices in the Trend Catalogue download, if...

This two wing Tungsten Carbide Tipped slotting cutter is ideal for grooving and rebating operations. A 1/2 inch diameter bearing is supplied with the cutter. Depth of cut (E) can be changed by purchasing alternative bearing sizes. Easy to se...

This two wing Tungsten Carbide Tipped slotting cutter is ideal for grooving and rebating operations. A 1/2 inch diameter bearing is supplied with the cutter. Depth of cut (E) can be changed by purchasing alternative bearing sizes. Easy to se...

For use in a router table only. Take 3 - 4 passes at repeated depths. Suitable for straight panels only. Dimensions : Diameter : 28mm D2=9.5mm Cutting Length : 30mm Cutting Radius 1 : 22mm Cutting Radius 2 : 18mm Shank Diam...

This dovetail cutter produces a tight reliable joint for drawers, boxes etc. For use with Trend DJ300. Solid Carbide Insert. Dimensions : Diameter : 6mm Cutting Length : 6.9mm Overall Length : 57.5mm Angle : 98 degrees Shank Di...

Should be used with a router of minimum power rating of 750 watts. It should be fitted in a router table which has an adjustable backfence and a mitre fence or workholding jig attachment. With an instruction booklet on constructing frame and pa...

This dovetail cutter produces a tight reliable joint for drawers, boxes etc. Dimensions : Diameter : 15 mm Cutting Length : 13.5 mm Overall Length : 63 mm Bearing Diameter : 12.7 mm Angle : 104 degrees Shank Diameter : 1/4 Pl...

Used for cutters with shank mounted bearings. Pack includes one collar, grub screw and hex key. Dimensions : IDiameter : 3/8 inch ODiameter : 15.8mm Hex key 1/16 inch Please note that prices in the Trend Catalogue download, if ...

Used for cutters with shank mounted bearings. Pack includes one collar, grub screw and hex key. Dimensions : ID = 1/4 inch OD = 11mm Hex key-1/16 inch Please note that prices in the Trend Catalogue download, if shown below,...

Used for cutters with shank mounted bearings. Pack includes one collar, grub screw and hex key. Dimensions : IDiameter : 3/8 inch ODiameter : 15.0mm Hex key 1/16 inch Please note that prices in the Trend Catalogue download, if ...

Multi-Mould cutter from the Dolls house cutter set. Dimensions : Diameter : 22 mm Cutting Length : 13 mm Cutting Radius : 3.5 mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, m...