Revolutionary routing concept that creates variable depth intricate wood carvings with a hand router. Woodcarvings can be made on new or existing doors, frames and drawer fronts. External dimensions 450mm x 450mm. Internal dimensions 240mm x...

Comprises of the Craft Range cutter Ref. C011X1/4TC and 13mm plastic guide bush. Dimensions : 8mm diameter cutter and a 13mm guide bush Please note that prices in the Trend Catalogue download, if shown below, may differ to the website...

Accessory kit for the DC400 dovetailing centre. Set comprises of the waste collector set, cable support, guide finger sets for 9 degrees, 11 degrees, 14 degrees, 20 degrees, housing template and a seven piece cutter set. Dimensions : Cutter ...

Clear acrylic 6mm templates for use with a router and template profiling cutter to create a curved rail and panelled door. Two part templates for both the concave and convex cut, for the frame and panel. Dimensions : Size : 374 x 290 x100mm

Ovolo cutter designed for sash bars but useful for decorative edging. Dimensions : Diameter : 7/8 inch Diameter : 22.2mm Cutting Length : 9/16 inch Cutting Length : 14.3mm Cutting Radius : 7.9mm Shank Diameter : 8mm Please no...

For picture hanging flush to the wall. Plunge cutter & move forward, then retract out from entry hole. A template is recommended. Dimensions : Diameter : 3/8 inch Diameter : 9.5mm D2=4.5mm Cutting Length : 11/64 inch Cutting L...

An unguided jointing cutter to create a drawer lock joint when making draws. Dimensions : Diameter : 25.4 mm Cutting Length : 12.7 mm Shank Diameter : 1/2 inch Material thickness 15mm to 25mm Please note that prices in the Trend...

Replacement slotter for the C220X1/4TC intumescent cutter. Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. Dimensions : Diameter=1/2 inches Diameter=12.7 mm Cutting Length : 16 m...

TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. Will plunge and clear chips to a depth of 70mm in a n...

A bevel door undercut/ leading edge router cutter with a long cutting length. For use on inside of doors to allow a tight fit against jamb,making it more accurate and quicker than hand or power planer. Dimensions : Diameter : 19.3mm Cut...

Extra long reversible blade cutter for routing hinge recesses in door frames and door leaves Extra long safety copying ring D30, 21 mm high, no. 497453, required for use of reversible blade cutters...

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbi...

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every Faithfull router cutter tip is made from tungsten carbi...

Features : For every flute cutter, Festool offers a roundover cutter with the same radius - Flute cutters and radius routers can be ideally combined, e.g., for profiles and counter profiles Specifications : D - 38,1 mm NL - 16 mm

Long router bit service life even for plunge cutting because of the soldered standard tungsten carbide blade. Together with the routing aids, automatic door seals can be routed on the front. for automatic door seal, 'PLANET'...

Dustproof clamping collets for routers OF 1400 and OF 2200. Open-ended spanner width 24 mm. for router shaft 6.35 mm...

Dustproof clamping collets for routers OF 1400 and OF 2200. Open-ended spanner width 24 mm. for router shaft Ø 12.7 mm...

Extra long reversible blade cutter for routing hinge recesses in door frames and door leaves. Technical data D 16 mm NL 50 mm GL 110 mm...

Two fluted Solid Carbide insert straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature.