
53.95 £
This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 6000RPM. Three flutes and three scribers. Specifically for use on...

39.95 £
For coves and part of a rule joint. Two flute. Dimensions : Diameter : 16mm Cutting Length : 19.5mm Cutting Radius : 8mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, may d...

39.95 £
For coves and part of a rule joint. Two flute. Dimensions : Diameter : 16mm Cutting Length : 19.5mm Cutting Radius : 8mm Shank Diameter : 8mm Please note that prices in the Trend Catalogue download, if shown below, may differ...

48.95 £
For coves and part of a rule joint. Two flute. Dimensions : Diameter : 25.4mm Cutting Length : 15.9mm Cutting Radius : 12.7mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, ...

32.95 £
Pin guided cutter permit freehand edging at considerable speed. Valuable for cutting small intricate shapes. Pin diameter 5.5mm. Dimensions : Cutting Length : 12.8mm Cutting Radius : 4.8mm Shank Diameter : 1/4 inch Please no...

65.95 £
Ideal panelling cutter for kitchen or cabinet doors. Dimensions : Diameter : 32mm Cutting Length : 17.5mm Cutting Radius : 26mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, ma...

61.95 £
Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5mm thicker than the cut length of the cutter. Complete with one bearing. Dimensions : Diameter : 35mm Cutting Length : 14....

63.95 £
This edge mould can also be used to create panelling effects, when using the whole width of the cutter. Dimensions : Diameter : 32mm Diameter : 16mm Cutting Length : 18mm Cutting Radius : 6mm Shank Diameter : 1/2 inch Please no...

65.95 £
Shape approximately equivalent to Ref. 18/81X1/2TC. Suitable panel mould for use with Ref. PSC/2X1/2TC & PSC/20X1/2TC. Ideal for use when no variable speed facility is available or when shaped work is not required. When used in a portable m...

55.95 £
Decorative ogee cutter for finishing furniture tops. Dimensions : Diameter : 33mm Diameter : 8mm Cutting Length : 23mm Cutting Radius : 7.2mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if...

8.95 £
Single flute cutter with an extra long shank. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only c...

26.95 £
One flute. Eccentric single flute cutter. Cutter is chosen for fast free cutting, when cutting speed takes preference over finish. Must not be used in eccentric chucks. Dimensions : Diameter : 7mm Cutting Length : 19mm Shank Dia...

23.95 £
Single flute cutter with an extra long shank. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and only c...

52.95 £
This cutter simplifies the construction of framing. The ogee matches the scriber 20/30X1/4TC to form a corner joint. Tenon and groove/rebate must be cut separately. Classic style for moulding, panelling and jointing. Make joints with R...

98.95 £
A one piece set for producing a lambs tongue sash bar and scribe. The set is initially used for scribing. By adding the rebate block onto the arbor, the set can then be used for profiling. To be used with router in stationary mode. Ma...

66.95 £
Scriber for the 20/50X1/2TC Lambs Tongue. Dimensions : Diameter : 1 3/8 inch Diameter : 35 mm Cutting Length : 43/64 inch Cutting Length : 17 mm Cutting Radius : 3 mm Shank Diameter : 1/2 inch Please note that prices in the T...

34.95 £
Complete with one bearing. Dimensions : Diameter : 19.1mm Cutting Length : 11.1mm Bearing Diameter : 19.1mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the webs...

45.95 £
Produces an elegant edge mould, or a shallow panel effect when routing on its full width. Dimensions : Diameter : 16mm Cutting Length : 10mm Cutting Radius : 5mm Shank Diameter : 1/4 inch Please note that prices in the Trend Cata...

53.95 £
Produces an elegant edge mould, or a shallow panel effect when routing on its full width. Dimensions : Diameter : 20mm Cutting Length : 15mm Cutting Radius : 6mm Shank Diameter : 1/2 inch Please note that prices in the Trend Cata...

42.95 £
An unusual profile with three radii for use as an edge mould or for panelling applications. A thin splitting cut along the middle creates two attractive edge moulds. Dimensions : Diameter : 27mm Cutting Length : 12mm Cutting Radius : 6...