
56.95 £
TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1 5/8 inch Diameter : 41.3mm Cutting Length : 25...

15.95 £
This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

205.95 £
This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

242.95 £
This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

107.95 £
This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

132.95 £
This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

60.95 £
Trend Rota-Tip A= 90í X 19mm Diax30mm Cut (Tct Router Cutter Range / Rota Tip) Two replaceable Solid Carbide blades. For specialist applications requiring low down-time and economy of a replaceable tip. Blade of cutter can be rotated th...

46.95 £
Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be le...

40.95 £
Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 32mm Cutting Length : 16mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 9.5mm Shank Diameter : 1/2 i...

48.95 £
Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 38mm Cutting Length : 19mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 12.7mm Shank Diameter : 8mm

55.95 £
Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. Dimensions : Diameter : 41.1mm Cutting Length : 20mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 14.2mm Shank Diameter : 1/...

29.95 £
Trend Double Overlap A=90í X25mm Cut (Tct Router Cutter Range / Overlap Trimmer) Cutter for trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Roughing cutter which leaves an overhang of 3mm, for...

44.95 £
Roman ogee with self guiding facility. To change profile use larger bearing and vary the depth. Supplied with two bearings. Dimensions : Diameter : 25.4mm Cutting Length : 15.9mm Bearing Diameter : 9.5 & 12.7mm Cutting Radius : 4mm

37.95 £
The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. Dimensions : Diameter : 19.1mm Cutting Length : 14.3mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 4.8mm Shank Diameter : ...

44.95 £
Self guided decorative bead ovolo supplied with two bearings. Larger bearing removes the quirk. Dimensions : Cutting Length : 16mm Bearing Diameter : 12.7mm & 16mm Cutting Radius 1 : 6.4mm Cutting Radius 2 : 4.8mm Shank Diameter : ...

56.95 £
Popular rebate set which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. When using bearing Ref. B95A, make two passes when a full dep...

52.95 £
Popular rebate set which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. When using bearing Ref. B95A, make two passes when a full dep...

48.95 £
Popular rebate set which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. Is Ideal with delicate applications such as musical instrumen...

94.95 £
Wide combination moulds for edging table tops and shelves. For stationary machines - 16000 RPM recommended speed. Dimensions : Diameter : 63mm Cutting Length : 20mm Bearing Diameter : 12.7mm Cutting Radius 1 : 10.5mm Cutting Radiu...

48.95 £
Two bearings are supplied for an optional lower quirk. Larger bearing removes the quirk. Dimensions : Diameter : 35mm Cutting Length : 16mm Bearing Diameter : 12.7mm & 16mm Cutting Radius : 8mm Shank Diameter : 1/4 inch Ple...