Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings. For stationary machines - 18000RPM recommended speed. Dimensions : Diameter : 57mm Cutting Length : 25.5mm

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Dimensions : Diameter : 38mm Cutting Length : 16mm Bearing Diameter : 12.7mm & 16mm Cutting R...

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay. Dimensions : Diameter : 12.7mm Cutting Length : 25.4mm Bearing Diameter : Fractionally larger than cutter diamm

For window boards 25mm thick. Two passes create shallow nosing. Dimensions : Diameter : 30mm Cutting Length : 16mm Cutting Radius : 16mm Bearing Diameter : 12.7mm Shank Diameter : 1/4 inch Please note that prices in the Trend C...

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should b...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile. For stationary machines - 12000 RPM recommended speed. Dimensions : Diameter : 76.5mm Cutting Length : 38mm Bearing Diameter : 9.5m...

Trend Trimmer A-90í X 18mm Dia (Tct Router Cutter Range / Laminate Trimmers) For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Tungsten Carbide Tipped. Use at speed 12000 - 2400...

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Single fluted. Dimensions : Diameter : 6.3mm Cutting Length : 18mm Shank Diameter : 1/4 inch

Designed to countersink slots in both plastic and non-ferrous metal. Material should be securely clamped. This countersink is produced in HSS and should not be confused with carbon steel types. Designed for countersinking mild steel, iron a...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With narrow neck for deep entry into second web of extrusions.

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

Cutter is designed to plunge and machine or mill lateral slots. Material should be securely clamped. For plastics only. Use at speed 10000 - 12000 RPM. Dimensions : Diameter : 4mm Cutting Length : 25mm Overall Length : 100mm ...

60 degree Taper Point with slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. Not for use with routers and not suitable for masonry work. Dimensions : Diamet...

60 degree Taper Point with slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. Not for use with routers and not suitable for masonry work. Dimensions : Diamet...

Designed for sash bar window construction. Dimensions : Diameter : 25mm Cutting Length : 18mm Cutting Radius : 10mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to ...