TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Has no centre TC tip and is not suitable for plunging. Short shank for Makita, Ryobi and Hitachi ...

Two flute cutter with an extra long shank. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Cutter has a narrow neck. Dimensions : Diameter : 1/2 inch Diameter : 12.7mm ...

Two flute cutter with an extra long shank. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Cutter has a narrow neck. Two flute TC cutter giving good chip clearance. Ideal for ...

Trend Dovetail A=100í X 14mm Dia (Tct Router Cutter Range / Dovetail) For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Dimensio...

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Right hand rotation. Purpose made for stair trenching machines. Dimensions :

Slotters with M12x1.0. threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Dimensions : Overall Length : 49 mm Shank D...

Slotters with M12x1.0. threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor enables 12mm bore guide bearings to be fitted...

Recessing cutter will accommodate the Schlegel Aquamac 21 seal. For use with the Aquamac seal in a wiping mode. Complete with a guide bearing to reduce setting-up time and simplify machining operations. Alternative bearing Ref. B35C is avai...

Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a M12 threaded boss to enable it to...

TCT two wing slotters with 1/4 inch bore Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. Dimen...

To produce grooves for the insertion of coloured or natural wood inlay. Supplied with three bearings to allow different depths of cut. Alternative bearings available. Designed for routing Corian, which is used in many bathrooms and kitchens....

A keyhole recess for picture hanging flush to the wall. No.8 and No.10 screw heads. Not suitable for grooving applications. Dimensions : Diameter : 9.5mm Diameter : 4.5mm Cutting Length : 4.5mm S=5.5mm Shank Diameter : 1/4 in...

Trend 'T' Slotter 12mm Dia X 12mm Cut (Tct Router Cutter Range / T Slotters) Slots for concealing electric cables etc. A 6mm slot must be cut first to allow for the cutter neck. Care must be taken to avoid breakage. Dimensions :

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 35/64 inch Diameter : 14mm Cutting Length : 25mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 5/8 inch Diameter : 15.9mm Cutting Length : 50mm...

Two flutes for clean finish. Suitable for plunge routers. Dimensions : Diameter : 43/64 inch Diameter : 17mm Cutting Length : 25mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown bel...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 5/8 inch Diameter : 16mm Cutting Length : 19mm

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 3/4 inch Diameter : 19mm Cutting Length : 37mm

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 7/8 inch Diameter : 22.2mm Cutting Length : 31mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1 inch Diameter : 25.4mm Cutting Length : 25mm