Fed up of not being able to find the right size Hex Wrench, LOOK no further!! The Park Tool Fold-Up Hex Wrench Set combines all the popular hex wrench sizes into one convenient fold-up tool, eliminating the need for a mess of loose tools. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.

Fed up of not being able to find the right size Hex Wrench, LOOK no further !! A selection of essential Metric and Imperial hex wrenches in a convenient folding package eliminates the need for a mess of loose tools. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.

Oversized centre hole and thin wall design allows use without removal of cones and locknuts. Thin wall construction allows use without removal of cones and locknuts.

Three hex wrenches in an effective package. Speeds up any job as you have all three hex keys in your hand at any one time. Made from heat treated Bondhus Protanium high torgue steel for a long life.

Fed up of not being able to find the right size hex wrenches in your tool box . Look no further the Park Tool Fold Up Hex Wrench Set combines all the popular hex wrench sizes into one convenient fold-up tool, eliminating the need for a mess of loose tools. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.

The Bottom Bracket tool is used to remove and install external bearing crankset bottom brackets. Fits external bearing bottom brackets with 16 external notches and an outside diameter of approximately 44mm

The Bottom bracket tool is for installing and removing Shimano and ISIS Drive splined twenty-tooth bottom bracket cups. Can be turned with a 3/8 inch drive torque wrench, 3/8 inch ratchet driver, 32mm wrench, 1 inch wrench, or FRW-1 Freewheel Remover Wrench.Made from investment cast steel, the bottom bracket tool utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup

Tool for removing and fitting 6 notch cups on sealed Bottom brackets. It has a long vinyl coated handle providing good leverage and grip. Fits cartridge cups used on Sachs and Campagnolo Veloce, Mirage, and Avanti

Part of a comprehensive range of freewheel and bottom bracket removal tools with an oversized centre hole and thin wall design that allows use without removal of cones and locknuts.

The Bottom bracket tool is used to remove and install external bearing crankset bottom brackets. One end of the bottom bracket tool securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap. The Bottom bracket tool fits cups and lockrings with 16 external notches and an outside diameter of approximately 44mm. Warning: this tool has a long handle and it is possible to damage the tool or the component by over-tightening during installation

Calliper Brake wrench, perfect for use on brakes and gears. Made from high strength steel with a nickel plate finish.

A worn chain shifts poorly and wears sprockets at an accelerated rate, the CC-3.2 is a Go / No-Go gauge is designed to accurately indicate when a chain reaches 0.5% and 0.75% wear - the point at which most chain manufacturers suggest replacement.

The Crank Puller uses a long, comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Strong rotating tip system ensures smooth operation and long life.

Features both a 14mm socket and 8mm hex wrench on a long, comfortable handle. 8 mm hex can also be used to install Shimano SPD and SPD-SL pedals that feature an 8 mm hex bolt axle design. Suitable for many common square taper crank bolts.

Remove the grit and grime with Park Tools Cyclone Chain Cleaner and keep your chain, in tip top condition. Using a series of rotating brushes, to get chains really clean and any grime or dirt that comes off your chain, is deposited inside the solvent reservoir, for easy cleaning. No need to remove the chain either, you lock the Cyclone Chain Cleaner to the chain and spin your pedals in a reverse motion and watch your chain come back to life. Any particles scrubbed from chain are kept in the reservoir, thanks to the magnet found at the bottom. Remember to lube your chain, after cleaning the chain.

The fine thread, special V-shaped handle, and super strong replaceable pin make chain removal and installation a breeze.

Park Tool Double ended cone wrenches are designed for the home mechanic or occasional user. They're made of thin steel and are nickel plated and heat treated for long use

Park Tool Double ended cone wrenches are designed for the home mechanic or occasional user. They're made of thin steel and are nickel plated and heat treated for long use.

Park Tool Double ended cone wrenches are designed for the home mechanic or occasional user. They're made of thin steel and are nickel plated and heat treated for long use

Specially designed, and precisely manufactured to gently adjust bent or damaged brake rotors. Centered handle is vinyl dipped for comfort.