The Hammer Strength Select Lat Pulldown is a fundamental part of the strength training progression. Thigh pads easily adjust to provide stability and comfort, and the straight-bar has angled ends to ensure correct arm and wrist positioning during workouts. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment. PRODUCT FEATURESCABLES7x19 strand construction, lubricated, nylon-coated cable meets U. S. military specifications INSTRUCTIONAL PLACARDSEasy-to-follow instructions illustrate proper use and muscles trained Axis of rotation marked with red indicator to help cue correct alignment BELTS AND PULLEYS4-1/2 (11 cm) and 6 (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings CUSHIONINGPads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability SHROUDSStandard rear shroud on SE models Optional full front shroud on SE models WEIGHT PLATES AND GUIDE RODSSolid-steel weight plates. Top weight plate is fitted with self-lubricating bushings 7/16 (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss Drop down incremental weight system (standard on SE models) ADJUSTMENTSRoller mechanism on seat adjustment provides smooth operation FRAME DESCRIPTIONEach frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity FOOT PLATFORMSPolyethylene spray-coated for impact, corrosion, and abrasion resistance HAND GRIPSGrips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant

The Hammer Strength Select Fixed Pulldown is a fundamental part of the strength training progression. Its defined path of motion is ideal for circuit training, and the angled seat and handgrips encourage proper exercise position. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment. PRODUCT FEATURESCABLES7x19 strand construction, lubricated, nylon-coated cable meets U. S. military specifications INSTRUCTIONAL PLACARDSEasy-to-follow instructions illustrate proper use and muscles trained Axis of rotation marked with red indicator to help cue correct alignment BELTS AND PULLEYS4-1/2 (11 cm) and 6 (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings CUSHIONINGPads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability SHROUDSStandard rear shroud on SE models Optional full front shroud on SE models WEIGHT PLATES AND GUIDE RODSSolid-steel weight plates. Top weight plate is fitted with self-lubricating bushings 7/16 (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss Drop down incremental weight system (standard on SE models) ADJUSTMENTSRoller mechanism on seat adjustment provides smooth operation FRAME DESCRIPTIONEach frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity FOOT PLATFORMSPolyethylene spray-coated for impact, corrosion, and abrasion resistance HAND GRIPSGrips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant

The Hammer Strength Select Lateral Raise is a fundamental part of the strength training progression. Pad positions are optimized for middle deltoid stimulation, and pivoting handles accommodate users of all sizes. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment. PRODUCT FEATURESCABLES7x19 strand construction, lubricated, nylon-coated cable meets U. S. military specifications INSTRUCTIONAL PLACARDSEasy-to-follow instructions illustrate proper use and muscles trained Axis of rotation marked with red indicator to help cue correct alignment BELTS AND PULLEYS4-1/2 (11 cm) and 6 (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings CUSHIONINGPads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability SHROUDSStandard rear shroud on SE models Optional full front shroud on SE models WEIGHT PLATES AND GUIDE RODSSolid-steel weight plates. Top weight plate is fitted with self-lubricating bushings 7/16 (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss Drop down incremental weight system (standard on SE models) ADJUSTMENTSRoller mechanism on seat adjustment provides smooth operation FRAME DESCRIPTIONEach frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity FOOT PLATFORMSPolyethylene spray-coated for impact, corrosion, and abrasion resistance HAND GRIPSGrips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant

The Hammer Strength Select Pectoral Fly/Rear Deltoid is a fundamental part of the strength training progression. It incorporates two different exercises while still offering pivoting arms and optimized handle placement to eliminate adjusting between exercises. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment. PRODUCT FEATURESCABLES7x19 strand construction, lubricated, nylon-coated cable meets U. S. military specifications INSTRUCTIONAL PLACARDSEasy-to-follow instructions illustrate proper use and muscles trained Axis of rotation marked with red indicator to help cue correct alignment BELTS AND PULLEYS4-1/2 (11 cm) and 6 (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings CUSHIONINGPads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability SHROUDSStandard rear shroud on SE models Optional full front shroud on SE models WEIGHT PLATES AND GUIDE RODSSolid-steel weight plates. Top weight plate is fitted with self-lubricating bushings 7/16 (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss Drop down incremental weight system (standard on SE models) ADJUSTMENTSRoller mechanism on seat adjustment provides smooth operation FRAME DESCRIPTIONEach frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity FOOT PLATFORMSPolyethylene spray-coated for impact, corrosion, and abrasion resistance HAND GRIPSGrips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant

The Hammer Strength Select Chest Press is a fundamental part of the strength training progression. The pressing arm adjusts in five positions for multiple ranges of motion. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment. PRODUCT FEATURESCABLES7x19 strand construction, lubricated, nylon-coated cable meets U. S. military specifications INSTRUCTIONAL PLACARDSEasy-to-follow instructions illustrate proper use and muscles trained Axis of rotation marked with red indicator to help cue correct alignment BELTS AND PULLEYS4-1/2 (11 cm) and 6 (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings CUSHIONINGPads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability SHROUDSStandard rear shroud on SE models Optional full front shroud on SE models WEIGHT PLATES AND GUIDE RODSSolid-steel weight plates. Top weight plate is fitted with self-lubricating bushings 7/16 (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss Drop down incremental weight system (standard on SE models) ADJUSTMENTSRoller mechanism on seat adjustment provides smooth operation FRAME DESCRIPTIONEach frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity FOOT PLATFORMSPolyethylene spray-coated for impact, corrosion, and abrasion resistance HAND GRIPSGrips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant

The Hammer Strength Select Biceps Curl is a fundamental part of the strength training progression. Arm pads are angled for stability and unwanted shoulder movement. Pivots and handgrips are positioned to reduce wrist strain and enhance alignment. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment. PRODUCT FEATURESCABLES7x19 strand construction, lubricated, nylon-coated cable meets U. S. military specifications INSTRUCTIONAL PLACARDSEasy-to-follow instructions illustrate proper use and muscles trained Axis of rotation marked with red indicator to help cue correct alignment BELTS AND PULLEYS4-1/2 (11 cm) and 6 (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings CUSHIONINGPads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability SHROUDSStandard rear shroud on SE models Optional full front shroud on SE models WEIGHT PLATES AND GUIDE RODSSolid-steel weight plates. Top weight plate is fitted with self-lubricating bushings 7/16 (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss Drop down incremental weight system (standard on SE models) ADJUSTMENTSRoller mechanism on seat adjustment provides smooth operation FRAME DESCRIPTIONEach frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity FOOT PLATFORMSPolyethylene spray-coated for impact, corrosion, and abrasion resistance HAND GRIPSGrips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant

The Deluxe Weight Tree offers four horns for maximum support and storage for your exercisers. FRAME DESCRIPTION11-gauge steel frame ensures maximum structural integrity Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability TECHNICAL SPECIFICATIONSDIMENSIONS (L x W x H) 20 in x 27 in x 39 in (51 cm x 69 cm x 100 cm) WEIGHT73 lb (34 kg) PRODUCT CODEFW-DWT

The Bumper Plate Storage offers two different frames to fit all size bumper plates. FRAME DESCRIPTION11-gauge steel frame ensures maximum structural integrity Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability TECHNICAL SPECIFICATIONSDIMENSIONS (L x W x H) 46 in x 16 in x 11. 5 in (117 cm x 41 cm x 30 cm) WEIGHT44 lb (20 kg) PRODUCT CODEFW-BPS

The Barbell Rack gives you convenient storage for 10 barbells. FRAME DESCRIPTION11-gauge steel frame ensures maximum structural integrity Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability TECHNICAL SPECIFICATIONSDIMENSIONS (L x W x H) 31 in x 28 in x 60 in (79 cm x 72 cm x 153 cm) WEIGHT142 lb (65 kg) PRODUCT CODEFW-BAR

The new Hammer Strength Heavy Duty Racks. The only Racks big and bold enough to carry the Hammer Strength name. We didn't design these racks. You did. We've forged your ideas with our experience and commitment to quality. You asked for top band pegs for overspeed training and pull-up handles with multi-grip angles for a variety of pull-up and chin-up options. You got 'em. You wanted an always-centered locking bench. No problem. You decide what you want each rack system to accomplish--and we make them fit your precise needs. That's the power of Hammer Strength Heavy Duty Racks. The only Racks big and bold enough to carry the Hammer Strength name. Key Features Band pegs on the top and bottom of the Rack offer options for over-speed training, variable resistance training and technique development. Rugged 3 x 3, 7-gauge steel tubing and rust pretreatment ensure long-lasting durability. Solid frame construction and dual 1 solid steel adjustment pins stand up to the most severe training demands. Multiple position chin-up handles reduce wrist stress and accommodate pull-ups, chin-ups, and close grip pull-ups. 10-year limited warranty on frame. NB: Bench/Bar/Weights not included

The new Hammer Strength Heavy Duty Racks. The only Racks big and bold enough to carry the Hammer Strength name. We didn't design these racks. You did. We've forged your ideas with our experience and commitment to quality. You asked for top band pegs for overspeed training and pull-up handles with multi-grip angles for a variety of pull-up and chin-up options. You got 'em. You wanted an always-centered locking bench. No problem. You decide what you want each rack system to accomplish--and we make them fit your precise needs. That's the power of Hammer Strength Heavy Duty Racks. The only Racks big and bold enough to carry the Hammer Strength name. Key Features Open top configuration allows unrestricted overhead movements to accommodate tall athletes. Rugged 3 x 3, 7-gauge steel and rust pretreatment ensure longlasting durability. Welded bottom band pegs allow for variable resistance training to be added to free weight lifting. Ergonomically angled chin-up handles provide natural exercise motion. 10-year limited warranty on frame. NB: Bench/Bar/Weights not included. Please click here to configure the colours of your product.

The Plate-Loaded Linear Leg Press is designed to be an easy-to-use and have a smooth linear leg press motion. It also employs a flip-in, flip-out mechanism to aid exercisers in use. STANDARD WEIGHT HORNS8STARTING RESISTANCE118 lbs (53 kg) FRAME DESCRIPTION11-gauge steel frame ensures maximum structural integrity Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability TECHNICAL SPECIFICATIONSDIMENSIONS (L x W x H) 95 in x 65 in x 57 in (242 cm x 166 cm x 145 cm) WEIGHT630 lb (286 kg) PRODUCT CODEHSLLP

The Plate-Loaded Tibia Dorsi Flexion is designed to move resistance to the hips instead of the spine, and targets the tibialis anterior muscle motions. STARTING RESISTANCE3 lbs (1 kg) FRAME DESCRIPTION11-gauge steel frame ensures maximum structural integrity Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability TECHNICAL SPECIFICATIONSDIMENSIONS (L x W x H) 15 in x 24 in x 12 in (39 cm x 61 cm x 31 cm) WEIGHT52 lb (24 kg) PRODUCT CODEPL-TIB

The Plate-Loaded Ground Base Squat High Pull introduces balance to the squat exercise while providing biomechanics that keep exercisers bodies in suitable positions for performance training. Ground Base equipment is designed to keep the exerciser firmly planted on the ground while maximizing power and explosiveness from the feet up. STANDARD WEIGHT HORNS4STARTING RESISTANCE12 lbs (5 kg) per workarm FRAME DESCRIPTION11-gauge steel frame ensures maximum structural integrity Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability TECHNICAL SPECIFICATIONSDIMENSIONS (L x W x H) 62 in x 57 in x 34 in (158 cm x 145 cm x 87 cm) WEIGHT220 lb (100 kg) PRODUCT CODEGB-SHP

The Plate-Loaded Ground Base Squat Lunge provides various strength curves by using different loading points and handle positions. Ground Base equipment is designed to keep the exerciser firmly planted on the ground while maximizing power and explosiveness from the feet up. STANDARD WEIGHT HORNS2STARTING RESISTANCE45 lbs (20 kg) FRAME DESCRIPTION11-gauge steel frame ensures maximum structural integrity Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability TECHNICAL SPECIFICATIONSDIMENSIONS (L x W x H) 54 in x 54 in x 32 in (138 cm x 138 cm x 82 cm) WEIGHT240 lb (109 kg) PRODUCT CODEGB-SL

The Plate-Loaded Ground Base Twist Left is ideal for athletes who rely on left-sided rotational motion for maximum performance. Ground Base equipment is designed to keep the exerciser firmly planted on the ground while maximizing power and explosiveness from the feet up. STANDARD WEIGHT HORNS2STARTING RESISTANCE12 lbs (5 kg) per workarm FRAME DESCRIPTION11-gauge steel frame ensures maximum structural integrity Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability TECHNICAL SPECIFICATIONSDIMENSIONS (L x W x H) 55 in x 50 in x 55 in (140 cm x 127 cm x 140 cm) WEIGHT200 lb (91 kg) PRODUCT CODEGB-TL

The Plate-Loaded Ground Base Twist Right is ideal for athletes who rely on right-sided rotational motion for maximum performance. Ground Base equipment is designed to keep the exerciser firmly planted on the ground while maximizing power and explosiveness from the feet up STANDARD WEIGHT HORNS2STARTING RESISTANCE12 lbs (5 kg) per workarm FRAME DESCRIPTION11-gauge steel frame ensures maximum structural integrity Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability TECHNICAL SPECIFICATIONSDIMENSIONS (L x W x H) 55 in x 50 in x 55 in (140 cm x 127 cm x 140 cm) WEIGHT200 lb (91 kg) PRODUCT CODEGB-TR

The Plate-Loaded Ground Base Combo Incline loads at opposite points allowing users to perform a twisting motion in an incline plane. And handles provide user stabilization during single-arm exercises. Ground Base equipment is designed to keep the exerciser firmly planted on the ground while maximizing power and explosiveness from the feet up. STANDARD WEIGHT HORNS2STARTING RESISTANCE8 lbs (3. 6 kg) FRAME DESCRIPTION11-gauge steel frame ensures maximum structural integrity Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability TECHNICAL SPECIFICATIONSDIMENSIONS (L x W x H) 58 in x 58 in x 55 in (148 cm x 148 cm x 140 cm) WEIGHT275 lb (125 kg) PRODUCT CODEGB-CI

The Plate-Loaded Ground Base Combo Decline loads at opposite points allowing users to perform a twisting motion in a decline plane. And handles provide user stabilization during single-arm exercises. Ground Base equipment is designed to keep the exerciser firmly planted on the ground while maximizing power and explosiveness from the feet up. STANDARD WEIGHT HORNS6STARTING RESISTANCE2 lbs (0. 9 kg) FRAME DESCRIPTION11-gauge steel frame ensures maximum structural integrity Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability TECHNICAL SPECIFICATIONSDIMENSIONS (L x W x H) 65 in x 51 in x 96 in (166 cm x 130 cm x 244 cm) WEIGHT360 lb (164 kg) PRODUCT CODEGB-CD

The Plate-Loaded Ground Base Combo Twist is perfect for athletes who rely on rotating motions for maximum performance. It also combines two workouts to save space. Ground Base equipment is designed to keep the exerciser firmly planted on the ground while maximizing power and explosiveness from the feet up. STANDARD WEIGHT HORNS2STARTING RESISTANCE8 lbs (3. 6 kg) FRAME DESCRIPTION11-gauge steel frame ensures maximum structural integrity Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability TECHNICAL SPECIFICATIONSDIMENSIONS (L x W x H) 58 in x 58 in x 55 in (148 cm x 148 cm x 140 cm) WEIGHT275 lb (125 kg) PRODUCT CODEGB-CT